Norrsken
doors
Doors » Lift & Slide Door

Lift & Slide Door

Norrsken’s Lift and slide patio door is best for locations such as balconies, terraces and other places where there is not enough room for traditional outward or inward opening solutions. Lift and slide patio doors are also perfect for where there is a need for large glazed areas.

Norrsken’s sliding patio doors are equipped with a high quality and modern GU-934-H hinge system that has a load bearing capability of 300 kg. Active leafi is located on the inner side of the door ensuring functionality for winter times - ice and snow does not damage the rails. The espagnolette and strong handle enable convenient operating and possibility to close door in ventilation position.

Our sliding patio door is available both in timber and aluminium clad. Traditional double glazing (Ug = 1,1 W/m²K) or energy efficient triple glazing (Ug = 0,6 W/m²K) can be used.

Finishing according to RAL, NCS (paint) or Norrsken (lacquer) tone catalogue by customer's preference.


Technical Properties of Norrsken Lift and Slide Door:

  • Thermal transmittance: Uw = 1,4 W/m²K with double glazing;
  • Thermal transmittance: Uw = 1,0 W/m²K with triple glazing;
  • Sound insulation: Rw (C; Ctr) = 34db (-1; -4)
  • Cross sections: frame 63 x 184 mm; leaf 97 x 78 mm; transom/mullion 85 x 78 mm; glazing bar 63 x 78 mm.
  • Pine wood with quality class A1–A3; threshold GU-934-H (height 67 mm);
  • Frame dimensions: WxH min. 1,53 x 1,80 m; max. 5,00 x 2,60 m;
  • Weight of opening door leaf is up to 300 kg;
  • Timber profiles are treated with water based preservatives;
  • Glass and in-fills: double glazing (26mm; Ug = 1,1 W/m²K); insulated 26 mm veneer or MDF panels; insulated 40 mm timber or MDF profiled panel;
  • Glazing and in-fills: triple glazing (40 mm; Ug = 0,6 W/m²K); insulated 26 mm veneer or MDF panels; insulated 40 mm timber or MDF profiled panel;
  • Hardware: GU-934-H hinges and locking system;

    Lift & slide door - aluminium clad PDF Aluminium Clad

    Lift & slide door - timber PDF Timber


  1. Norrsken quotes are valid for 2 months from the date shown on the quotation.

  2. Payment terms are 50% deposit on placing the order and the remaining 50% upon your completed order being ready to ship from the factory. Once the sales contract is signed you agree to pay the full amount as stated in the contract based upon these payment terms.

  3. Once the deposit is paid your window manufacturing will commence. As each window is a bespoke product for your requirements changes cannot be made once manufacturing has started.

  4. Orders are based upon the measurements supplied to the factory either by you or by Norrsken. Where you have supplied the measurements, either from a window schedule or scaled drawings please check that these are accurate. Once manufacturing has started changes cannot be made. Norrsken will endeavor to check any measurements supplied to us but in the event that an error is made Norrsken cannot be held responsible.

  5. When the delivery arrives at the address supplied, removal of the goods from the delivery vehicle is the responsibility of the customer.

  6. Once the windows are delivered the warranty period commences and any issues arising will be covered by the warranty where applicable.

  7. When the delivery of your windows is made Norrsken will check with yourself or someone appointed by you that everything is in order with the delivery and that no damage has occurred in transit. Any problems must be pointed out at this stage. Claims can only be processed whilst we are on site and Norrsken cannot be held responsible for any damage occurring after the delivery has been signed off.

  8. A fitting manual will be supplied with your order. Any installation work carried out by you or by somebody appointed by you must be carried out in accordance with these fitting instructions. Failure to do so may invalidate your warranty.
ENQUIRE